Dell Vostro 260s Owner's Manual (Slim Tower) - Page 59

Run the Hard Disk Drive tests in the Dell, KEYBOARD CLOCK LINE FAILURE - setup

Page 59 highlights

Error Messages HARD-DISK DRIVE FAILURE HARD-DISK DRIVE READ FAILURE INSERT BOOTABLE MEDIA INVALID CONFIGURATION INFORMATION-PLEASE RUN SYSTEM SETUP PROGRAM KEYBOARD CLOCK LINE FAILURE KEYBOARD CONTROLLER FAILURE Description boot the computer from a optical drive. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics. The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive, and boot the computer from a optical drive. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics. The hard drive may be defective. Shut down the computer, remove the hard drive, and boot the computer from a optical. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in the Dell Diagnostics. The operating system is trying to boot to non-bootable media, such as a floppy disk or optical drive. Insert bootable media. The system configuration information does not match the hardware configuration. The message is most likely to occur after a memory module is installed. Correct the appropriate options in the system setup program. For external keyboards, check the cable connection. Run the Keyboard Controller test in the Dell Diagnostics. For external keyboards, check the cable connection. Restart the computer, and 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

Error Messages
Description
boot the computer from a optical drive.
Then, shut down the computer, reinstall
the hard drive, and restart the computer. If
the problem persists, try another drive.
Run the Hard Disk Drive tests in the Dell
Diagnostics.
HARD-DISK DRIVE FAILURE
The hard drive does not respond to
commands from the computer. Shut down
the computer, remove the hard drive, and
boot the computer from a optical drive.
Then, shut down the computer, reinstall
the hard drive, and restart the computer. If
the problem persists, try another drive.
Run the
Hard Disk Drive
tests in the
Dell
Diagnostics
.
HARD-DISK DRIVE READ FAILURE
The hard drive may be defective. Shut
down the computer, remove the hard
drive, and boot the computer from a
optical. Then, shut down the computer,
reinstall the hard drive, and restart the
computer. If the problem persists, try
another drive. Run the
Hard Disk Drive
tests in the Dell Diagnostics.
INSERT BOOTABLE MEDIA
The operating system is trying to boot to
non-bootable media, such as a floppy disk
or optical drive. Insert bootable media.
INVALID CONFIGURATION
INFORMATION-PLEASE RUN SYSTEM
SETUP PROGRAM
The system configuration information does
not match the hardware configuration. The
message is most likely to occur after a
memory module is installed. Correct the
appropriate options in the system setup
program.
KEYBOARD CLOCK LINE FAILURE
For external keyboards, check the cable
connection. Run the
Keyboard Controller
test in the
Dell Diagnostics
.
KEYBOARD CONTROLLER FAILURE
For external keyboards, check the cable
connection. Restart the computer, and
59