Dell Vostro 270s Owner's Manual - Page 19

Installing the I/O Panel, Removing the Processor

Get Dell Vostro 270s PDF manuals and user guides View all Dell Vostro 270s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installing the I/O Panel 1. Insert the I/O panel into the slot on the front panel. 2. Slide the I/O panel to align it with the screw holes on the front panel. 3. Tighten the screw to secure the I/O panel to the front panel. 4. Route the I/O panel cables through the routing channels on the chassis. 5. Connect the I/O panel cables to the system board. 6. Install: a) expansion card b) drive cage c) front bezel d) fan shroud e) cover 7. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) cover b) fan shroud c) heat-sink assembly 3. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor cover and remove the processor from the socket, and place it in antistatic bag. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
Installing the I/O Panel
1.
Insert the I/O panel into the slot on the front panel.
2.
Slide the I/O panel to align it with the screw holes on the front panel.
3.
Tighten the screw to secure the I/O panel to the front panel.
4.
Route the I/O panel cables through the routing channels on the chassis.
5.
Connect the I/O panel cables to the system board.
6.
Install:
a)
expansion card
b)
drive cage
c)
front bezel
d)
fan shroud
e)
cover
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
cover
b)
fan shroud
c)
heat-sink assembly
3.
Press the release lever down and then move it outward to release it from the retention hook. Lift the processor
cover and remove the processor from the socket, and place it in antistatic bag.
19