Dell Vostro 270s Owner's Manual - Page 29
Exit, Updating the BIOS, If you have your computer's Service Tag or Express Service Code - desktop
View all Dell Vostro 270s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CPU Configuration Auto Power On Post Behaviour NumLock Key Keyboard Error Report Table 6. Boot Set Boot Priority Hard Disk Drives CD/DVD ROM Drives Table 7. Security Unlock Setup Status Admin Password Status System Password Status Admin Password Enable or disable the computer to power on automatically. You can further specify the date and time the computer power on. Default: Disabled Enable or disable the NumLock State light during POST. Enable or disable the Keyboard Error Report to be displayed during POST. Default: On Default: Enabled Specifies the order of different devices in which the computer will boot through at start up. Specify which hard drive the computer can boot through. Specify which CD/DVD the computer can boot through. Specifies whether the BIOS can be edited. Specifies whether an administrator password has been assigned. Specifies whether a system password has been assigned. Allows you to change or delete the administrator password. Exit This section allows you to save, discard, and load default settings before exiting from System Setup. Updating the BIOS It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For notebooks, ensure that your computer battery is fully charged and connected to a power outlet 1. Restart the computer. 2. Go to support.dell.com/support/downloads. 3. If you have your computer's Service Tag or Express Service Code: NOTE: For desktops, the service tag label is available on the front of your computer. NOTE: For notebooks, the service tag label is available on the bottom of your computer. a) Enter the Service Tag or Express Service Code and click Submit. b) Click Submit and proceed to step 5. 4. If you do not have your computer's service tag or express service code, select one of the following: a) Automatically detect my Service Tag for me b) Choose from My Products and Services List 29