Dell Vostro 3446 Dell Vostro 14 3446 Owners Manual - Page 31

Installing the Power Connector

Page 31 highlights

3. Disconnect the power connector from the system board (1) and un-thread the cable from the retaining clips (2). Then, lift the power connector and cable off the computer. Installing the Power Connector 1. Insert the power connector into its slot on the chassis and guide the cable into the retaining tabs. 2. Connect the power connector cable to the system board. 3. Install: a. palmrest assembly b. keyboard c. memory module d. hard-disk drive e. WLAN card f. access panel g. optical-disk drive h. battery 4. Follow the procedures in After Working Inside Your Computer. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

3.
Disconnect the power connector from the system board (1) and un-thread the cable from the
retaining clips (2). Then, lift the power connector and cable off the computer.
Installing the Power Connector
1.
Insert the power connector into its slot on the chassis and guide the cable into the retaining tabs.
2.
Connect the power connector cable to the system board.
3.
Install:
a.
palmrest assembly
b.
keyboard
c.
memory module
d.
hard-disk drive
e.
WLAN card
f.
access panel
g.
optical-disk drive
h.
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
31