Dell Vostro 3580 Service Manual - Page 29

Coin-cell battery, Removing the coin-cell

Get Dell Vostro 3580 PDF manuals and user guides View all Dell Vostro 3580 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the optical drive assembly 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Coin-cell battery Removing the coin-cell Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. Steps 1. Using a plastic scribe, gently pry the coin-cell battery out of the slot on the I/O board [1]. 2. Remove the coin-cell battery away from the system [2]. Removing and installing components 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Next steps
1.
Connect the
battery
cable to the connector on the system board.
2.
Replace the
base cover
3.
Replace the
optical drive assembly
4.
Replace the
SD memory card
5.
Follow the procedure in
after working inside your computer
Coin-cell battery
Removing the coin-cell
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
optical drive assembly
4.
Remove the
base cover
5.
Disconnect the
battery
cable from the connector on the system board.
Steps
1.
Using a plastic scribe, gently pry the coin-cell battery out of the slot on the I/O board [1].
2.
Remove the coin-cell battery away from the system [2].
Removing and installing components
29