Dell Vostro 3580 Service Manual - Page 58
Power-button board, Removing the power button board
View all Dell Vostro 3580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Next steps 1. Replace the WLAN 2. Connect the battery cable to the connector on the system board. 3. Replace the base cover 4. Replace the optical drive assembly 5. Replace the SD memory card 6. Follow the procedure in after working inside your computer Power-button board Removing the power button board Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. 6. Remove the WLAN 7. Remove the system fan 8. Remove the display assembly Steps 1. Open the latch and disconnect the power button board cable from the system [1]. 2. Peel the conductive tape off the power button board [2]. 3. Remove the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [3]. 4. Lift the power button board, along with the cable off the palmrest and keyboard assembly [4]. 58 Removing and installing components