Dell Vostro 3580 Service Manual - Page 41
Heat sink, Removing the heatsink, Installing the heatsink
View all Dell Vostro 3580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Heat sink Removing the heatsink Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the optical drive assembly 4. Remove the base cover 5. Disconnect the battery cable from the connector on the system board. Steps 1. Loosen the four captive screws that secure the heatsink to the system board [1]. NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink. 2. Remove the three (M2x3) screws that secure the heatsink to the system board [2]. 3. Lift the heatsink off the system board [3]. Installing the heatsink Steps 1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1]. Removing and installing components 41