Dell Vostro 3581 Service Manual - Page 41
Heat sink, Removing the heatsink
View all Dell Vostro 3581 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Next steps 1. Connect the battery cable 2. Install the base cover 3. Install the optical drive 4. Install the micro SD card 5. Follow the procedure in after working inside your computer Heat sink Removing the heatsink Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD card 3. Remove the optical drive 4. Remove the base cover 5. Remove the battery Steps 1. Loosen the four captive screws that secure the heatsink to the system board [1]. NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink. 2. Remove the three (M2x3) screws that secure the heatsink to the system board [2]. 3. Lift the heatsink off the system board [3]. Removing and installing components 41