Dell Vostro 3581 Service Manual - Page 60

Installing the power button board, Power button, Removing the power button

Get Dell Vostro 3581 PDF manuals and user guides View all Dell Vostro 3581 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Installing the power button board Steps 1. Place the power-button board into the slot on the palmrest and keyboard assembly [1]. 2. Replace the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [2]. 3. Affix the conductive tape to the power button board [3]. 4. Slide the power button cable to the system board and close the latch to secure the cable [4]. Next steps 1. Install the display assembly 2. Replace the system fan 3. Replace the WLAN 4. Connect the battery cable 5. Install the base cover 6. Install the optical drive 7. Install the micro SD card 8. Follow the procedure in after working inside your computer Power button Removing the power button Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the micro SD card 3. Remove the optical drive 4. Remove the base cover 60 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Installing the power button board
Steps
1.
Place the power-button board into the slot on the palmrest and keyboard assembly [1].
2.
Replace the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [2].
3.
Affix the conductive tape to the power button board [3].
4.
Slide the power button cable to the system board and close the latch to secure the cable [4].
Next steps
1.
Install the
display assembly
2.
Replace the
system fan
3.
Replace the
WLAN
4.
Connect the
battery cable
5.
Install the
base cover
6.
Install the
optical drive
7.
Install the
micro SD card
8.
Follow the procedure in
after working inside your computer
Power button
Removing the power button
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
micro SD card
3.
Remove the
optical drive
4.
Remove the
base cover
60
Removing and installing components