Dell Vostro 3581 Service Manual - Page 79

Display hinges, Removing the display hinges

Page 79 highlights

Next steps 1. Install the display bezel 2. Install the display assembly 3. Install the WLAN 4. Connect the battery cable 5. Install the base cover 6. Install the optical drive 7. Install the micro SD card 8. Follow the procedure in after working inside your computer Display hinges Removing the display hinges Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the micro SD card 3. Remove the optical drive 4. Remove the base cover 5. Disconnect the battery cable 6. Remove the WLAN 7. Remove the system fan 8. Remove the display assembly 9. Remove the display bezel 10. Remove the display panel Steps 1. Remove the eight (M2.5x2.5) screws and two (M2x2) screws that secure the hinges to the display back-cover and antenna assembly [1, 2]. 2. Lift the hinges and brackets off the display back-cover and antenna assembly [3]. Removing and installing components 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90

Next steps
1.
Install the
display bezel
2.
Install the
display assembly
3.
Install the
WLAN
4.
Connect the
battery cable
5.
Install the
base cover
6.
Install the
optical drive
7.
Install the
micro SD card
8.
Follow the procedure in
after working inside your computer
Display hinges
Removing the display hinges
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
micro SD card
3.
Remove the
optical drive
4.
Remove the
base cover
5.
Disconnect the
battery cable
6.
Remove the
WLAN
7.
Remove the
system fan
8.
Remove the
display assembly
9.
Remove the
display bezel
10.
Remove the
display panel
Steps
1.
Remove the eight (M2.5x2.5) screws and two (M2x2) screws that secure the hinges to the display back-cover and antenna assembly
[1, 2].
2.
Lift the hinges and brackets off the display back-cover and antenna assembly [3].
Removing and installing components
79