Dell Vostro 3584 Service Manual - Page 39

Heat sink, Removing the heatsink, Installing the heatsink

Get Dell Vostro 3584 PDF manuals and user guides View all Dell Vostro 3584 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

3. Install the SD card 4. Follow the procedure in after working inside your computer Heat sink Removing the heatsink Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable 5. Remove the system fan Steps 1. Loosen the four captive screws that secure the heatsink to the system board [1]. NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink. 2. Lift the heatsink off the system board [2]. Installing the heatsink Steps 1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1]. 2. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2]. Removing and installing components 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
3.
Install the
SD card
4.
Follow the procedure in
after working inside your computer
Heat sink
Removing the heatsink
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
base cover
4.
Disconnect the
battery cable
5.
Remove the
system fan
Steps
1.
Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2.
Lift the heatsink off the system board [2].
Installing the heatsink
Steps
1.
Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2.
In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].
Removing and installing components
39