Dell Vostro 3584 Service Manual - Page 55
Installing the power button board, Power button, Removing the power button
View all Dell Vostro 3584 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing the power button board Steps 1. Place the power-button board into the slot on the palmrest and keyboard assembly [1]. 2. Replace the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [2]. 3. Affix the conductive tape to the power button board [3]. 4. Slide the power button cable to the system board and close the latch to secure the cable [4]. Next steps 1. Install the display assembly 2. Replace the system fan 3. Replace the WLAN 4. Connect the battery cable 5. Install the base cover 6. Install the SD card 7. Follow the procedure in after working inside your computer Power button Removing the power button Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD card 3. Remove the base cover 4. Disconnect the battery cable 5. Remove the WLAN Removing and installing components 55