Dell W-7010 AOS 6.4.x CLI Reference Guide - Page 1123

Parameter Tx Broadcast Data Frames Sent (PPS) Tx Multicast Data Frames Tx Multicast Data Frames(PPS) Tx DMO Multicast Description Rate of broadcast data frames transmitted by the AP, in packets per second. Multicast data frames transmitted by the AP. Rate of multicast data frames transmitted by the AP, in packets per second. The number of multicast frames transmitted as multicast without converting to unicast. Tx DMO Invalid The number of multicast frames which should have been converted but were not as due to invalid format. (This value is typically normally 0.) Tx DMO Converted Tx DMO Replicated Tx DMO Dropped Tx DMO No Client Tx DMO No BSSID Tx Unicast Data Frames Tx RTS Success Tx RTS Failed Tx CTS Frames Tx CTS Frames (PPS) The number of multicast frames received as multicast which were then converted to unicast one or more times. This counter increments once per multicast frame. The number of frames transmitted as unicast frames. For each multicast frame the counter is incremented by the number of replications for that frame. (The number of replications is the number of clients associated to the BSSID, VLANor group receiving these frames). The number of frames dropped as conversion was not consistent with state on the AP. (This value is typically normally 0.) Number of times no client was found for an association-ID indicated by the frame. (This value is typically normally 0.) Number of times the BSSID indicated by the frame was not found. (This value is typically normally 0.) Number of transmitted unicast data frames Number of Ready To Send (RTS) frames successfully transmitted. Number of Ready To Send (RTS) frames that were not successfully transmitted Number of Clear-to-Send (CTS) frames transmitted. Rate of CTS frames sent, in packets per second. (This parameter does not include CTS frames send in response to RTS). 1123 | show ap debug radio-stats Dell Networking W-Series ArubaOS 6.4.x | User Guide