Dell W-7010 AOS 6.4.x CLI Reference Guide - Page 257

Parameter dot11a-traffic-mgmt-profile Description Configures bandwidth allocation. See wlan trafficmanagement-profile on page 2334. Default - dot11g-radioprofile Configures 802.11g radio settings for the AP group; contains the ARM profile. See rf dot11a-radio-profile on page 752. "default" dot11g-trafficmgmt-profile Configures bandwidth allocation. See wlan traffic- - management-profile on page 2334. enet0-profile Configures the duplex and speed of the Ethernet 0 interface on the AP. See ap enet-link-profile on page 178. "default" enet1-profile Configures the duplex and speed of the Ethernet 1 interface on the AP. See ap enet-link-profile on page 178. "default" event-thresholds-profile Configures Received Signal Strength Indication (RSSI) metrics. See rf event-thresholds-profile on page 776. "default" exclude-mesh-cluster-profile-ap Excludes the specified mesh cluster profile from this - AP. The Secure Enterprise Mesh license must be installed. exclude-virtual-ap Excludes the specified virtual AP profiles from this AP. ids-profile Configures Dell's Intrusion Detection System (IDS). See ids profile on page 439. "default" mesh-cluster-profile Configures the mesh cluster profile for the AP (mesh node). There is a "default" mesh cluster profile; however, it is not applied until you provision the mesh node. See ap mesh-cluster-profile on page 191. The Secure Enterprise Mesh license must be installed. "default" priority Configures the priority of the mesh cluster profile. If 1 more than two mesh cluster profiles are configured, mesh points use this number to identify primary and backup profile(s). The supported range of values is 1-16. The lower the number, the higher the priority. mesh-radio-profile Configures the 802.11g and 802.11a radio settings for the AP (mesh node). See ap mesh-ht-ssid-profile on page 193. "default" 257 | ap-name Dell Networking W-Series ArubaOS 6.4.x | User Guide