Dell W-7024 SPR-WL2-MNT Installation Guide - Page 3
Wall Mounting
![]() |
View all Dell W-7024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Wall Mounting This option allows mounting the device on a wall. Required Tools and Equipment Two wall-mount brackets Eight M4 x 8 mm Phillips flat head screws Wall-mount screws (not included in this package, the type of screw depends on the installation surface) Suitable screwdrivers (not included in this package) Wall anchors (optional, not included in this package) NOTE: The Ethernet ports must be facing down when installing the device on a wall. Installation Steps To install the device on a wall: 1. Fasten the wall-mount brackets over the mounting holes on the sides of the device using the M4 x 8 mm Phillips head screws and a suitable screwdriver (see Figure 3). Figure 3 Attaching the Wall-Mount Brackets (W-7205) 2. After choosing a location, mark the points on the wall for the mounting holes. 3. Drill the holes and insert wall anchors if needed. 4. Align the holes of the mounting bracket with the holes on the wall (see Figure 4). 5. Use the appropriate screws to secure the device. 6. Connect the AC power cord to the rear of the device to power up. Dell Networking SPR-WL2-MNT | Installation Guide 3
![](/manual_guide/products/dell-w7024-sprwl2mnt-installation-guide-ae8d722/3.png)