Dell W-7030 MNT-19 Mounting Kit Installation Guide - Page 1
Dell W-7030 Manual
![]() |
View all Dell W-7030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Dell Networking W-7030-MNT-19 Installation Guide This mounting kit allows mounting the W-7030 controller in a two-post 19-inch Telco rack or on a wall. Package Contents Two Mounting Brackets Eight M3 x 6.5 mm Phillips flat head screws Four M6 x 15 mm Phillips pan head screws Four M6 Cage Nut Four M6 Clip Nut Installation Guide (this document, printed) Rack Installation CAUTION: Each W-7030 controller should have its own mounting equipment. Do not place other networking equipment directly on top of a mounted W-7030 controller. Failure to do so can damage the device. Required Tools and Equipment The following tools and equipment are required for installing a W-7030 controller: Mounting bracket (x2) Screws for mounting bracket (x8): M3 x 6.5 mm Phillips flat head screws Screws for system rack mount (4x): M6 x 15 mm Phillips pan head screws M6 cage nut (x4): Optional M6 clip nut (x4): Optional Suitable screwdrivers for all screw types provided in the box (not included in the package) NOTE: Some racks require screws that differ from those included with the W-7030 controller. Ensure that you have the correct screws before installing the W-7030 controller. Installation Steps To install a W-7030 controller into a two-post 19-inch Telco rack: 1. Place the mounting bracket over the mounting holes on the controller (see Figure 1). 2. Secure the bracket to the controller using the eight screws for the mount bracket (four per bracket) and a suitable screwdriver. 0511666-02 | February 2015 1
![](/manual_guide/products/dell-w7030-mnt19-mounting-kit-installation-guide-c306b88/1.png)