Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 203

Parameter Description Default 52-56 Note: Changing the country code causes the valid channel lists to be reset to the defaults for the country. valid-11a-80mhz-channel-group This parameter defines which 80 MHz channels on - the "a" band are available for assignment by ARM and for controller to randomly assign if the user has not specified a channel. The channel numbers below correspond to channel center frequency. valid-11a-channel Enter a single 802.11a channel number for 20 MHz operation within the specified regulatory domain. country code determines supported channels Note: Changing the country code causes the valid channel lists to be reset to the defaults for the country. valid-11g-40mhz-channel-pair Specify a channel pair valid for 40 MHz operation in the 802.11g frequency band for the specified regulatory domain. The two channels must be separated by a dash. Example: 1-5 2-6 7-11 country code determines supported channel pairs Note: Changing the country code causes the valid channel lists to be reset to the defaults for the country. valid-11g-channel Enter a single 802.11g channel number for 20 MHz operation within the specified regulatory domain. country code determines supported channels Note: Changing the country code causes the valid channel lists to be reset to the defaults for the country. Usage Guidelines This profile configures the country code and valid channels for operation of APs. The list of valid channels only affects the channels that may be selected by ARM or by the controller when no channel is configured. Channels that are specifically configured in the AP radio settings profile (see rf dot11a-radio-profile or rf dot11g-radioprofile) must be valid for the country and the AP model. 203| ap regulatory-domain-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide