Dell W-Series 228 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2381

wms client wms client mode {manually-contain|interfering|valid} valid-exempt {insert|remove} Description This command allows you to classify a wireless client into one of several categories. Syntax Parameter client Description MAC address of the client. mode Classify the client into one of the following categories: manually-contain Manually enable denial of service to this client. interfering Setting the client mode to interfering makes it part of clients outside the enterprise valid A client that is part of the enterprise. valid-exempt Classify the client under this option to exempt from Valid Station Protection and Valid Station Misassociation Detection. insert Add the client to the valid-exempt list and exempt from Valid Station Protection and Valid Station Misassociation Detection. If the client exists in the WMS, the classification is set to valid. In case the client does not exist in the WMS, a client entry is created and then the classification is set to valid. remove Remove the client from the list of valid-exempt clients. Usage Guidelines ArubaOS can automatically determine client classification based on client behavior, but this command allows you to explicitly classify a client. The classification of a client is used in certain policy enforcement features. For example, if protect-valid-sta is enabled in the IDS Unauthorized Device Profile, then clients that are classified as valid cannot connect to non-valid APs. Example The following command classifies a client as valid: (host) #wms client 00:00:A4:34:C9:B3 mode valid Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wms client | 2381