Dell W-Series 277 AP-270-MNT-H1 Horizontal Mounting Kit Installation Guide - Page 4
Mounting the AP to a Horizontal Pole,
View all Dell W-Series 277 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Figure 6 Adjusting the inclination of the AP M6x20 Screw 8. Use the cable tie to fasten the cables on the bracket. Mounting the AP to a Horizontal Pole 1. Begin by attaching the mounting bracket to the horizontal pole as shown in Figure 7. a. Pass a hose clamp through the two slots on the mounting bracket, attach the mounting bracket to the pole and tighten the clamp using a screw driver to twist its screw head. b. Use another hose clamp through the other two slots on the mounting bracket and tighten the clamp. The hose clamps provided with the AP have an optimal pole diameter range of 4" to 6" (100 to 150mm). Outside of that, longer or shorter clamps may be required. Figure 7 Attaching the Mounting Bracket to a Horizontal Pole 2. Use the M10x30 screw (with washer) and M10 nut included in the package to attach the mounting holder to the mounting bracket as shown in Figure 8. 4 AP-270-MNT-H1 Mounting Kit | Installation Guide