Dell W4201C Owners Manual - Page 39

FILE LOCATION: D:\manual\Dell\W4201OM\approval-B\ch5e.fm Problem Screen has one or more lines Possible Solution 1 Check the aspect ratio settings in the TV Menu. Press the Menu button on the remote control and select Size. For more information on using the TV Menu, see "Using the TV Menu" on page 27. 2 Ensure the proper source is selected in the Input Source menu. See "Input Select" on page 28 for more information. |support.dell.com 3 Try connecting a different device. Ensure that you properly connect the cables and update the input source in the TV Menu. 4 Update the size settings in the TV Menu. Press Menu on the remote control and select Size. .dell.com w 5 Reset the original factory defaults. Press Menu on the remote control, select Setup, and then select Factory Reset. w w The front panel buttons do not work Check the TV Menu to see if the buttons have been locked. Press Menu on your remote control, select Setup. If you are unable to use the remote control, press the volume up and the channel up buttons on the bottom of the TV for 10 seconds to unlock the buttons. The picture is too small 1 Adjust the size settings. Press Menu on the remote control, and select Size. 2 This may be a problem with your device. See the documentation for the device. An image appears to be stuck on the In TV MENU Setup select Plasma Conditioning. Using this TV. option may take several hours before the image is eliminated. NOTE: Burn-in is not covered by your Dell warranty. DELL CONFIDENTIAL - PRELIMINARY 12/28/05 - FOR PROOF ONLY Troubleshooting Problems With Your TV 39