Dell W4201C Owners Manual - Page 40

FILE LOCATION: D:\manual\Dell\W4201OM\approval-B\ch5e.fm |support.dell.com TV Menu Messages While using your TV, the following messages may appear. Message Possible Solution Auto Adjust No action required, the TV is performing an auto adjustment. Out of Range Check the optimal resolution settings. .dell.com No Video Input w You may need to download a new video driver. For more information, go to support.dell.com. 1 Check all cables are properly connected. 2 Ensure the proper source is selected. See "Input Select" on page 28 w w for more information. TV Button Lock To unlock, press Menu on your remote control, select Setup. In Power Save Mode If you have a computer connected to the TV display and there is no Press any key on keyboard or move mouse signal detected, the TV display goes in to sleep mode. The power light is amber when the TV display in is sleep mode. In Power Save Mode Press Check Video Signal If you are using a video device and it has been inactive for 30 minutes the TV display goes in to power save mode. The power light is amber when the TV display is in power save mode. Self Test Appears for computer source when there is nothing plugged in. Select VGA from Input Select menu and nothing is plugged in. Plug a computer in to the VGA connector. Remote Control Problems Problem Possible Solution The TV does not respond when using 1 Point the remote control directly at the lower right corner of the the remote control TV. Be sure that nothing is blocking the front of the TV. For the location of the IR, see "Front View" on page 5. 2 Verify that the batteries are properly installed. 3 If the batteries are old, install new batteries. NOTE: Bright lights or other infrared devices may interfere with your remote control and IR on the TV display. DELL CONFIDENTIAL - PRELIMINARY 12/28/05 - FOR PROOF ONLY 40 Troubleshooting Problems With Your TV