Dell XPS 11 9P33 Service Manual - Page 13

Removing the Wireless Card, Prerequisites, Procedure

Page 13 highlights

Removing the Wireless Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 5. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 7. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. See "Removing the Base Cover" on page 8. 2 Remove the battery. See "Removing the Battery" on page 11. Procedure 1 Peel off the conductive tape that covers the antenna cables. 2 Disconnect the antenna cables from the wireless card. 3 Remove the screw that secures the wireless card to the system board. 4 Slide and remove the wireless card out of the wireless-card connector. 2 3 4 1 5 1 conductive tape 3 antenna cables (2) 5 wireless-card connector 2 screw 4 wireless card Removing the Wireless Card | 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

Removing the Wireless Card
|
13
Removing the Wireless Card
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 5. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 7.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 8.
2
Remove the battery. See "Removing the Battery" on page 11.
Procedure
1
Peel off the conductive tape that covers the antenna cables.
2
Disconnect the antenna cables from the wireless card.
3
Remove the screw that secures the wireless card to the system board.
4
Slide and remove the wireless card out of the wireless-card connector.
1
conductive tape
2
screw
3
antenna cables (2)
4
wireless card
5
wireless-card connector
1
2
3
4
5