Dell XPS 600 Owner's Manual - Page 104
System Board Components on Diskette, Drive
View all Dell XPS 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
www.dell.com | support.dell.com data cable power cable tabs (2) floppy drive 4 Attach the power and data cables to the floppy drive. 5 Connect the other end of the data cable to the DSKT connector on the system board (see "System Board Components" on page 78). 6 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 7 Close the computer cover (see "Closing the Computer Cover" on page 125). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 8 Connect your computer and devices to electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 9 Enter system setup (see "System Setup" on page 131) and update the appropriate Diskette Drive option. 104 Removing and Installing Parts