Dell XPS 600 Owner's Manual - Page 91
Installing PCI and PCI Express Cards, If you removed a sound card or a network adapter - sound driver
View all Dell XPS 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 6 Press the retention arm into place, securing the card(s) in the computer. retention arm alignment bar alignment guide filler bracket NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer. 7 Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 8 If you removed a sound card or a network adapter, see "Network Adapter and Sound Card Settings" on page 94. 9 Uninstall the driver for the card that you removed. Installing PCI and PCI Express Cards NOTICE: If you have or are upgrading to the optional dual-graphics configuration, see "Installing PCI Express Graphics Cards in a Dual Configuration" on page 86 to install a graphics card. 1 Follow the procedures in "Before You Begin" on page 69. 2 Press the lever on the card retention arm and raise the retention arm. Removing and Installing Parts 91