Denon 3808CI Owners Manual - Page 59

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press . "ZONE2 SOURCE" is shown on the display. ZONE2 SOURCE ZONE2 TUNER ···· ZONE2 XM RECOUT XM RECOUT NET/USB ···· RECOUT SOURCE 2 Turn until "RECOUT SOURCE" is displayed. The " " indicator lights. 3 Turn to choose the input source to be recorded. 4 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 47). 5 Start recording. For operating instructions, refer to the respective equipment's operating instructions. • To cancel, press , then turn until "ZONE2 SOURCE" is displayed. • Make a test recording before starting the actual recording. • Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals. • Digital audio signals input to the DENON LINK or HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors. • Sources selected with the REC OUT mode are output from ZONE2 as well. • In the REC OUT mode, the remote control unit's ZONE2 mode buttons cannot be operated. • The "XM" digital audio output signals are not output from the OPTICAL2 or OPTICAL3 output connectors. Also, network audio signals (Internet radio, music server, USB) are not output if they are copyright-protected. NOTE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • When "DENON LINK" is assigned at the GUI menu "Assign" setting, the PCM signals, network audio signals (Internet radio, music server and USB), XM signals input from the digital input connectors cannot be output from the analog REC OUT connectors. • Input sources for which "Delete" is selected at "Source Delete" cannot be selected. Convenient Functions Channel Level You can adjust the channel level either according to the playback sources or to suit your taste, as described below. 1 Press CH SELECT. 2 Use ui or CH SELECT to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 3 Use o p to adjust the volume. b "OFF" can be set by pressing o when the subwoofer's volume is set to -12 dB. Fader Function This function lets you adjust (fade) the sound from all the front or rear speakers at once. 1 Press CH SELECT. 2 Press ui or CH SELECT to select "Fader". 3 Use o p to adjust the volume of the speakers. (o: front, p: rear) • The fader function does not affect the subwoofer. • The fader can be adjusted until the volume of the speaker adjusted to the lowest value is -12 dB. 56