Denon 500M Operating Instructions - Page 6

4. CONNECTIONS • Be sure to turn off the amplifier's power when making connections. 1 Use the included connecting cords to connect the left(L) and right(R) output terminal (PHONO OUT) to the amplifier's PHONO L and R input terminals. RL ORUTPULT 2 Connect the ground wire (with the output cords) to the amplifier's GND (ground) terminal. RL 3 Plug the power cord into an AC120V power outlet. • If the amplifier or another component includes a power outlet, it can be used, but first check in the amplifier's manual that there is sufficient power capacity. Amplifier 5. OPERATION (1) Turning on the power 1 Press the POWER button. • 33 LED of the speed selector button lights. Note • Always unplug the power cord when not using the turntable for an extended period of time. (2) Playing records (a) Starting playback 1 Press the POWER button. 2 Turn on the amplifier's power and set the input to "PHONO". 3 Set a record on the turntable. To play 45 rpm records, use the included adapter. 4 Set the speed selector button according to the record's playing speed. 5 Press the START/STOP button. • The turntable starts turning at the speed set in step 4. 6 6 Lift the lifter lever, hold the head shell's finger support, and move the tone arm to the desired position over the record. 7 Lower the lifter lever. • The tone arm lowers gently until the stylus is on the record and playback begins. (b) Stopping or interrupting playback 1 Gently lift the lifter lever. • The tone arm rises and the stylus lifts off the record. 2 Hold the head shell's finger support and move the tone arm back onto the arm rest. 3 Secure the tone arm on the arm rest. 4 Press the START/STOP button. • The turntable stops turning. Note • Do not subject the turntable to vibrations or shocks while a record is playing. • Wait until the turntable stops turning before replacing records. • Please turn down the volume of the amplifier when lowering the stylus onto the record and when lifting it off the record.