Denon 5308CI Owners Manual - Page 8

GUI Menu Map Setup Playback Information Troubleshooting s Audyssey Settings Select Room EQ, Dynamic EQ and Dynamic Volume. Room EQ [Selectable items] Audyssey : Optimize frequency response of all speakers. Audyssey Byp. L/R Audyssey Flat Manual OFF : Optimize frequency response of speakers except front L and R speakers. : Optimize frequency response of all speakers to flat response. : Apply frequency response set with "Manual EQ". : Turn equalizer off. Operating from the main unit or main remote control unit Press ROOM EQ. OFF Audyssey Audyssey Byp. L/R Manual Audyssey Flat • When "Audyssey", "Audyssey Byp. L/R" or "Audyssey Flat" is selected, " " lights. • After running Auto Setup, if the Speaker Configuration, Distance, Channel Level, and Crossover Frequency have changed without increasing the number of speakers measured, only " " lights. • "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" can be selected after the auto setup procedure has been performed. • After performing "Auto Setup", the "Room EQ" setting automatically becomes "Audyssey". • If the settings of speakers for which "None" has been determined at "Auto Setup" are changed, "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" cannot be selected. Either perform Auto Setup again, or return to the setting after running Auto Setup with "Auto Setup" - "Parameter Check" - "Restore". • When using headphones or analog EXT. IN mode, "Room EQ" cannot used. Dynamic EQ Audyssey Dynamic EQ™ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ works in tandem with Audyssey MultEQ® XT to provide well-balanced sound for every listener at any volume level. [Selectable items] ON : Use Dynamic EQ function. OFF : Do not use Dynamic EQ function. Operating from the main unit or main remote control unit Press or [PARA]. Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF Dynamic EQ / Volume : OFF • " Dynamic EQ" can only be set when auto setup has been performed. • After performing "Auto Setup", the "Dynamic EQ" setting automatically becomes "ON". • " Dynamic EQ" cannot be set in the following situations. ⋅ If "Auto Setup" fails to be completed. ⋅ After running Auto Setup, when the number of used speakers has increased from the number of measured speakers. • W hen "Room EQ" is set to "OFF" or "Manual", "Dynamic EQ" is automatically set to "OFF". • B efore running Auto Setup and after running Auto Setup, if the number of speakers has increased or you pressed or [PARA], "Run Audyssey" is displayed. In this case, either perform Auto Setup, or return to the setting after running Auto Setup with "Auto Setup" - "Parameter Check" - "Restore". NOTE When you set "Dynamic EQ" to "ON", "Tone" and "Night Mode" cannot be used. n Operating conditions for each function • D ynamic EQ : When "Room EQ" is set to "Audyssey", "Audyssey Byp. L/R" or "Audyssey Flat" • D ynamic Volume : When "Dynamic EQ" is set to "ON" • S etting : When "Dynamic Volume" is set to "ON" Room EQ Dynamic EQ Dynamic Volume Setting Dynamic Volume Audyssey Dynamic Volume™ solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same. [Selectable items] ON : Use Dynamic Volume. The Dynamic Volume effect will be at the level of the "Setting". OFF : Do not use Dynamic Volume. Operating from the main unit or main remote control unit Press or [PARA]. Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF Dynamic EQ / Volume : OFF