Denon AVR-1312 Getting Started Guide - Page 11

Connect Preparation SVENSKA NEDERLANDS ESPAÑOL POITARTLUIAGNUOÊS FERSAPANÑÇOALIS FDREAUNTÇSCAHIS ENGLISH Default settings are underlined. Channel Level Default settings are underlined. 3 Use ui to select a speaker, and use o p to select distance. Front L / Front R / Center / Subwoofer / Surround L / Surround R / Surround Back Lz / Surround Back Rz Select the speaker. z When the "Speaker Config." - "Surround Back" (vpage 5) setting is set to
"None", "Surround Back L" and "Surround Back R" is not displayed. • 0.0ft - 60.0ft : Set the distance. 1 Use ui to select "Channel Level", and then press ENTER. Speaker Setup Speaker Config. Bass Setting Distance Channel Level Crossover Freq. Test Tone Start Default [ENTER] Enter [ ] Return • The speakers that can be selected differ depending on the "Speaker Config." (vpage 5) settings. • Default settings : Front L / Front R / Center / Subwoofer : 12.0 ft Surround L / Surround R / Surround Back L / Surround Back R : 10.0 ft • Set the difference in the distance between the speakers to less than 20 ft. NOTE Speakers set to "None" in "Speaker Config." (vpage 5) are not displayed. 4 Press ENTER to enter the setting. Speaker Setup Speaker Config. Bass Setting Distance Channel Level Crossover Freq. Step Front L/R Center Subwoofer Surround L/R 1 Channel Level Test Tone Start Default 2 Press ENTER. Output test tone. 1 Channel Level Front L Center Front R Surround R 0.0dB 0.0dB 0.0dB 0.0dB Surround L Subwoofer 0.0dB 0.0dB [ENTER] Enter [ ] Return 3 Use ui to select a speaker, and use o p to adjust the sound volume of each speaker to be equal. Front L / Center / Front R / Surround R / Surround Back Rz / Surround Back Lz / Surround L / Subwoofer Select the speaker. z When the "Speaker Config." - "Surround Back" (vpage 5) setting is set to
"None", "Surround Back L" and "Surround Back R" is not displayed. • -12.0dB - +12.0dB (0.0dB) : Adjust the volume. • When o is pressed while the subwoofer volume is set to "-12 dB", the "Subwoofer" setting switches to "OFF". • When "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see vm page 26 "Adjusting the volume of the speakers". NOTE • Speakers set to "None" in the "Speaker Config." (vpage 5) settings are not displayed. • When a headphones jack is inserted in the PHONES jack of this unit, the "Channel Level" is not displayed. Default The "Channel Level" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. 4 Press ENTER to enter the setting. 1 Channel Level Test Tone Start Default 5 Press RETURN B. Speaker Setup Speaker Config. Bass Setting Distance Channel Level Crossover Freq. Test Tone Start Default Setup Playback 7