Denon AVR-1312 Getting Started Guide - Page 12
Playing a Blu-ray Disc player - owners manual
UPC - 883795002011
View all Denon AVR-1312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH FDREAUNTÇSCAHIS FERSAPANÑÇOALIS POITARTLUIAGNUOÊS ESPAÑOL NEDERLANDS SVENSKA Crossover Freq Default settings are underlined. 1 Use ui to select "Crossover Freq", and then press ENTER. Speaker Setup Speaker Config. Bass Setting Distance Channel Level Crossover Freq. Front Center Surround Surround Back [ENTER] Enter [ ] Return 1 Crossover Freq. Front Center Surround Surround Back Full Band 80Hz 80Hz None 2 Use ui to select a speaker, and use o p to select the frequency. Front / Center / Surround / Surround Back Specify crossover frequency for each speaker. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequency. • "Crossover Freq." can be set when the "Bass Setting" - "SW Mode" (vpage 6) setting is "LFE+Main", or when you have a speaker that is set to "Small". • Always set the crossover frequency to "80Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • The "SW Mode" setting (vpage 6) determines which speakers can be set. • When "LPF for LFE" is selected, speakers set to "Small" at "Speaker Config." can be set. If the speakers are set to "Large", "Full Band" is displayed and the setting cannot be made. • If set to "LFE+Main", this setting can be made regardless of the speaker size. 3 Press ENTER to enter the setting. Speaker Setup Speaker Config. Bass Setting Distance Channel Level Crossover Freq. Front Center Surround Surround Back 4 Press MENU. The menu display disappears. Playing a Blu-ray Disc player This section explains the basic operations for surround playback using a Blu-ray Disc player connected to this unit. For details, see the included CD-ROM (Owner's manual). 1 Press BD to switch an input source for a player used for playback. 2 Play the component connected to this unit. Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. 3 Adjust the sound volume. M d/f Volume up /down N Muting 4 Press SURROUND 0 or SURROUND 1 to select a listening mode. The listening mode is displayed on the display or TV screen. • Each time SURROUND 0 or SURROUND 1 is pressed, the listening mode is switched. Select the desired listening mode. When power is switched to standby Press STANDBY (X). n Power indicator status in standby mode • Normal standby : Off NOTE During power standby, a minimal amount of power is consumed. To totally cut off the power, remove the power cord from the power outlet. GConnecting a Blu-ray Disc playerH Blu-ray Disc player )%.* 065 HDMI cable (sold separately) Other operations See the following items on the included CD-ROM (Owner's manual). n Playing a Blu-ray Disc player/DVD player n Tuning in radio stations n Playing a portable player n Convenient functions n Playing an iPod® n How to make detailed settings 8