Denon AVR 1906 Owners Manual - Page 14

ENGLISH Easy Setup and Operation 4 Press the CURSOR D or H button to select from the following three items based on the measurement results, then press the CURSOR F button. Store: Store the checked measurement values. All parameters are stored. Retry: Perform the measurement again. Measurement is repeated. Cancel: Cancel the checked measurement values. Connecting Other Sources Cable indications The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied). Audio cable A Analog terminal (Stereo) (White) (Red) L L R R Pin-plug cable B Analog terminal (Monaural, for subwoofer) F Video terminal Video cable (Yellow) Video cable (75 Ω/ohm video pin-plug cable) G S-Video terminal Playing a DVD with surround sound 1 Disconnect the microphone from the unit. 2 Select the input source to be played. 3 Select the play (surround) mode. 4 Start DVD playback. 5 Adjust the volume. Pin-plug cable C Digital terminal (Coaxial) (Orange) Coaxial cable (75 Ω/ohm pin-plug cable) D Digital terminal (Optical) Optical cable (Optical fiber cable) E Speaker terminal Speaker cable S-Video cable H Component video terminal (Green) (Blue) (Red) Component video cable Signal direction Audio signal IN Video signal IN OUT OUT OUT OUT (Y) (PB/CB) (PR/CR) IN IN NOTE: • Do not plug in the power supply cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Note that binding pin-plug cables together with power supply cords or placing them near a power transformer will result in hum or other noise. 11 ENGLISH