Denon AVR-3312CI AVR3312CI_OwnersManual - Page 110
ENTER, Surr.Back R
UPC - 883795002042
View all Denon AVR-3312CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Basic version Advanced version Setting items Distance Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Default : The "Distance" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return all settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Front L / Front R / Center / Subwoofer / Surround L / Surround R / Surr.Back Lz / Surr.Back Rz / F.Height L / F.Height R / F.Wide L / F.Wide R : Select the speaker. zz When the "Speaker Config." - "Surr.Back" setting (vpage 106) is set to "1spkr", "Surr.Back" is displayed. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. • The speakers that can be selected differ depending on the "Amp Assign" (vpage 105) and "Speaker Config." (vpage 105) settings. • Default settings : Front L / Front R / Center / Subwoofer / F.Height L / F.Height R / F.Wide L / F.Wide R : 12.0 ft (3.60 m) Surround L / Surround R / Surr.Back L / Surr.Back R : 10.0 ft (3.00 m) • Set the difference in the distance between the speakers to less than 20.0 ft (6.00 m). NOTE Speakers set to "None" in "Speaker Config." (vpage 105) are not displayed. SYSTEM SETUP Setting items Setting details Channel Level Test Tone Start : Output test tone. Set the volume of the test • Front L / F.Height L / Center / F.Height R / Front R / F.Wide R / tone to be the same when it Surround R / Surr.Back Rz / Surr.Back Lz / Surround L / F.Wide L / is output from each speaker. Subwoofer : Select the speaker. zz When the "Speaker Config." - "Surr.Back" setting (vpage 106) is set to "1spkr", "Surr.Back" is displayed. • -12.0dB - +12.0dB (0.0dB) : Adjust the volume. When "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 73. NOTE • Speakers set to "None" in the "Speaker Config." (vpage 105) settings are not displayed. • When a headphones jack is inserted in the PHONES jack of this unit, the "Channel Level" is not displayed. Default : The "Channel Level" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return all settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. vSee overleaf Information BD 107