Denon AVR-3312CI AVR3312CI_OwnersManual - Page 118
Zone Setup, Power On Level
UPC - 883795002042
View all Denon AVR-3312CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Basic version Advanced version Zone Setup Default settings are underlined. Set the audio to play back with multi-zone (ZONE2, ZONE3). • "ZONE2" is displayed when "ZONE2" is selected with "Amp Assign" (vpage 105). • "ZONE3" is displayed when "ZONE3" is selected with "Amp Assign" (vpage 105). Setting items Setting details Bass -10dB - +10dB (0dB) Adjust low frequency range (bass). Treble -10dB - +10dB (0dB) Adjust high frequency range (treble). HPF Make settings for cutting the low range to reduce distortion in the bass. ON : The low range is attenuated. OFF : The low range is not attenuated. Lch Level Adjust the left channel output level. -12dB - +12dB (0dB) The "Lch Level" can be set when "Channel" (vpage 115) is set to "Stereo". Rch Level Adjust the right channel output level. -12dB - +12dB (0dB) The "Rch Level" can be set when "Channel" (vpage 115) is set to "Stereo". Channel Set the signal output from multi-zone. Stereo : Select stereo output. Mono : Select mono output. When "Amp Assign" (vpage 105) is set to "Z2/Z3(M)", the "Channel" setting is automatically set to "Mono". Volume Level Set the volume output level. Variable : Volume adjustment is enabled by main unit and remote control unit. -40dB (41) : Fix volume at -40 dB. Set when adjusting volume by external amplifier. 0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external amplifier. Volume Limit Make a setting for maximum volume. When "Amp Assign" (vpage 105) is set to "ZONE2", "ZONE3" or "Z2/Z3(M)", the "Volume Level" setting is automatically set to "Variable". OFF : Do not set a maximum volume. -20dB (61) / -10dB (71) / 0dB (81) This is displayed from 0 to 99 when "Volume Display" (vpage 116) is set to "Absolute". Setting items Power On Level Define the volume setting that is active when the power is turned on. Mute Level Set the amount of attenuation when muting is on. SYSTEM SETUP Setting details Last : Use the memorized setting from the last session. - - - (0) : Always mute when power is turned on. -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. This is displayed from 0 to 99 when "Volume Display" (vpage 116) is set to "Absolute". Full : The sound is muted entirely. -40dB : The sound is attenuated by 40 dB down. -20dB : The sound is attenuated by 20 dB down. Information BD 115