Denon AVR-4306 Owners Manual - Page 111
Specifications - troubleshooting
View all Denon AVR-4306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Troubleshooting Symptom Cause Measures Page "CHECK ANTENNA" is • AVR-4306's XM terminal and the • Check that the connection are 21 displayed in the XM XM Connect-and-Play antenna is correct. mode. not properly connected. "NO SIGNAL" is • The signal cannot be received. displayed in the XM mode. • Reposition your XM Connect-and- 42 Play antenna. "OFF AIR" is displayed in the XM mode. • The selected channel currently broadcasting. is not • Select the another channel. 42, 43 Receiving only XM • The XM Tuner is not activated. • Contact XM Radio. 42 channels 0 and 1. Specifications Specifications 2 Audio section • Power amplifier Rated output: Front: 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 170W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround (A, B): 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround Back: 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 2 Video section • Standard video terminals Input / output level and impedance: Frequency response: • S-Video terminals Input / output level and impedance: Frequency response: • Color component video terminal Input / output level and impedance: Frequency response: 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms C (color) signal - 0.286 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz - +0, -3 dB Y (brightness) signal - 1 Vp-p, 75 Ω/ohms PB/CB signal - 0.7 Vp-p, 75 Ω/ohms PR/CR signal - 0.7Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz - +0, -3 dB 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) 2 Tuner section [FM] [AM] Dynamic power: Output terminals: • Analog Input sensitivity / input impedance: Frequency response: S/N: Distortion: Rated output: • Digital D/A output: 150 W x 2 ch (8 Ω/ohms) 220 W x 2 ch (4 Ω/ohms) Front, Center, Surr. Back 6 ~ 16 Ω/ohms Surround: A or B 6 ~ 16 Ω/ohms A + B 8 ~ 16 Ω/ohms 200 mV / 47 kΩ/kohms 10 Hz ~ 100 kHz: +0, -3 dB (DIRECT mode) 102 dB (DIRECT mode) 0.005% (20 Hz ~ 20 kHz) (DIRECT mode) 1.2 V Rated output - 2 V (at 0 dB playback) Total harmonic distortion - 0.008 % (1 kHz, at 0 dB) S/N ratio - 102 dB Dynamic range - 100 dB Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N (IHF-A): Total Harmonic Distortion (at 1 kHz): 2 General Power supply: Power consumption: Maximum external dimensions: Mass: (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB MONO 0.15% STEREO 0.3% 520 kHz ~ 1710 kHz 18 µV AC 120 V, 60 Hz 8.0 A 1 W Max (Standby) 434 (W) x 171 (H) x 429 (D) mm (17-3/32" x 6-47/64" x 16-57/64") 18.5 kg (40 lbs 12.6 oz) Digital input: Format - Digital audio interface 2 Remote control unit (RC-1024) • Phono equalizer (PHONO input - REC OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Batteries: External dimensions: Mass: LR6/AA Type (two batteries) 63 (W) x 238 (H) x 31 (D) mm (2-31/64" x 9-3/8" x 1-7/32") 190 g (Approx. 6.7 oz) (including batteries) Rated output / Maximum output: Distortion factor: 150 mV / 8 V 0.03% (1 kHz, 3 V) 106 * For purposes of improvement, specifications and design are subject to change without notice.