Denon AVR-486S Owners Manual - Page 38

ENGLISH Advanced Operation Multi zone music entertainment system ZONE2 speaker out can be used when "ZONE2" is selected at "Power Amp Assignment". In this case, surround back speaker out cannot be used for MAIN ZONE. ZONE2 OFF Advanced Operation ZONE2 ON • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. 2 When using the SURR.BACK/ZONE2 amplifier as the ZONE2 • To use the ZONE2, turn on the ZONE2 button. • The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit's ZONE2 VOLUME button. • The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output. [System configuration and connections example] Using this unit's internal amplifier as the ZONE2. MAIN ZONE 5.1-channel systems Monitor FL DVD player B Input C This unit FR SW ZONE2 SPEAKER OUT SL SR SYSTEM REMOTE CONTROL UNIT RC-1001 : SPEAKER cable Refer to "Connections" ( page 11). ZONE2 MODE 1 CHANNEL MODE 2 VOLUME Remote control unit operations during multi-source playback (selecting the source) This is only possible when the main unit in the ZONE2 mode ( page 16). 1 Set the MODE 1 switch to the "AUDIO". 2 Set the MODE 2 switch to the "ZONE2". 3 Press the ZONE2 ON button. To cancel the ZONE2 mode: Press the ZONE2 OFF button. 4 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing the VOLUME button on the remote control unit. Default setting (ZONE2 VOLUME LEVEL): - - - dB (MINIMUM) 35 ENGLISH