Denon AVR3310CI Owners Manual Addendum - English - Page 11

Getting Started Connections Settings Playback Information Unavailable Functions After Upgrading Specifications Setting items Setting contents Channel Level Test Tone Start : Output test tone. Set the volume of the test • Front L / Front Height L / Center / Front Height R / Front R / Front tone to be the same when it Wide R / Surround R / S. Back Rz / S. Back Lz / Surround L / Front is output from each speaker. Wide L / Subwoofer : Select the speaker. z : When the "Speaker Configuration" - "Surround Back" setting (vpage 9) is set to "1spkr", "S. Back" is displayed. • -12.0dB ~ +12.0dB (0.0dB) : Adjust the volume. Crossover Frequency Outputs at below set frequency, each speaker's bass signal output from the subwoofer. Set this according to the low frequency reproduction capabilities of the speakers you are using. • Speakers set to "None" in the "Speaker Configuration" (vpage 8) settings are not displayed. • When o is pressed while the subwoofer volume is set to "-12 dB", the "Subwoofer" setting switches to "OFF". • When a headphones jack is inserted in the PHONES terminal of the AVR3310CI, the "Channel Level" is not displayed. • You can also press [CHANNEL LEVEL] to set (vpage 79 of GThe original versionH Operating Instructions "Adjust the Volume of the Different Speakers"). Default : Reset all channel level settings to factory default. • Yes : Reset to the defaults. • No : Do not reset to the defaults. 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequency. Advanced : Specify crossover frequency for each speaker. • Front / Center / Surround / Surround Back / Front Height / Front Wide : Select the speaker. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz /150Hz / 200Hz / 250Hz : Set the crossover frequency. • Can be set when the "Speaker Configuration" - "Subwoofer" (vpage 8) setting is "Yes", or when you have a speaker that is set to "Small". • Always set the crossover frequency to "80 Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • The speakers that can be set when "Advanced" is selected differ according to the "Subwoofer Mode" setting (vpage 9). • When "LFE" is selected, speakers set to "Small" at "Speaker Configuration" can be set. If the speakers are set to "Large", "Full Band" is displayed and the setting cannot be made. • If set to "LFE+Main", this setting can be made regardless of the speaker size. Setting items Front Speaker Setup Set the front speakers to use for every surround mode. ENGLISH Making Detailed Settings (Manual Setup) Setting contents Setting : Choose the method for setting the front speakers. • Normal : The front speakers are set using the . • Custom : The front speakers used for the different playing modes are set in advance. 2CH DIRECT/STEREO : The front speakers used in the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. MULTI CH : The front speakers used in modes other than the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. NOTE • When set to "Custom", does not operate. • The front speaker setting stored for the "Quick Select" function is given priority. Main remote control operation buttons :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) :Confirm the setting :Return to previous menu 10