Denon DCM 390 Owners Manual - Page 10

ENGLISH Operation [NUMBER] (0~9, +10) [DISC SELECT] 1 [8] 2 3 21 Turning the power on Press . ¢ To turn off the power: Press again. 5 DISC SKIP NOTE: • To turn off the power while a disc is playing, be sure to press 2 to stop playback before turning off the power. Operation NOTE: • The player will not operate properly and the disc may even be damaged if it is not set correctly. • If your finger should get caught in the drawer when it closes, press 5. • Do not place any foreign objects on the disc tray, and do not place more than one disc on the tray at a time. Otherwise malfunction may occur. • Do not push in the disc tray manually when the power is off as this may cause malfunction and damage the CD player. • Do not touch the carousel while it is turning. Also, do not turn the carousel by hand when it is stopped. Doing so could damage it. • Do not insert disc where indicated by arrow. This could damage the internal mechanism in the unit. 5 DISC SKIP 3 [9] Opening and closing the drawer and loading a disc 1 Press 5. • Make sure the drawer is completely open. Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.) 2 Set the disc properly in the tray according to its size. • Set 8 cm discs in the center hole. • Set 12 cm discs in the outer hole. 3 Press DISC SKIP. The carousel turns and a disc can be loaded in the another disc tray. When the drawer is opened during the play mode, it is possible to load and unload discs in all of the disc trays other than the one whose disc is currently playing. 4 Press 5 again. LABEL SIDE UP WARD About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 7 ENGLISH