Denon DN-HC5000 Operating Instructions - Page 11

ENGLISH Q1 Beat-Matching Display Shows transients (usually the drums) to visually aid beat-matching. Q2 Tempo-Matching Display Displays tempos of both tracks to visually aid mixing. Q3 Status Bar Displays the status of the currently selected item. Q4 Virtual Deck Visual representation of the virtual deck. Q5 BPM Field / Tap Displays the track's BPM. You can click this field to "tap" out a time, from which the software will approximate and save a new BPM. If there is no BPM for the track, it will display TAP to prompt you to tap out a suggested tempo. Q6 Track Time Display Displays the current position of the playhead in the track. Q7 Loop Number Displays the number of the currently selected loop. Clicking the "lock" icon next to it will disable any changes to the current loop. Clicking the "X" icon next to it will delete the current loop. Q8 REPEAT Toggles Repeat Mode "On" or "Off" for the track (when Playback Mode is set to "Single") or Crate (when Playback Mode is set to "Continuous"). Whenever a new track is loaded, this will default to "Off." Q9 PLAYBACK Toggles between "Single" and "Continuous" Playback Modes. Single Playback Mode plays only one track, stopping when it is finished. Continuous Playback Mode will automatically play the next track in the Crate when one track ends. Whenever a new track is loaded, this setting will remain the same. W0 RANGE Displays the current range applied to the PITCH SLIDER. W1 Waveform Waveform of the currently loaded track. The top waveform is the left deck; the bottom is the right deck. W2 PITCH Applied pitch offset as a percentage (%) (determined by the position of the PITCH SLIDER). W3 Artist Name "Artist" tag for the current track. W4 Track Name "Title" tag for the current track. W5 Track Overview An overview of the currently loaded track's entire waveform. W6 Crates Displays the list of Crates and Sub-Crates available. 4. ITCH Setup SOFTWARE INSTALLATION • Free updates to the ITCH software are available from http://www.serato.com/itch • We suggest you check the website for the latest version before installing. 1. The following screen will appear. Click Next. INSTALLATION Windows The installer should start automatically, if not; • Either Insert the Serato ITCH install CD into your computer's CD drive and browse to it using Windows Explorer. • Or Browse using Windows Explorer to the location where the ITCH download installer was saved, unpack the ITCH .zip file and browse to the extracted contents. 2. Accept the License Agreement and then click Next. • Then: Double click the file called "ITCH_installer.exe". 3. Choose the location you want to install to and click Next.  ENGLISH