Denon DN-HC5000 Operating Instructions - Page 6

ENGLISH 2 CONNECTIONS 1. ITCH Connection CAUTION: • Be sure to use the supplied control cord. Using another type of cable may result in damage. • Be sure the power is off when connecting the control cord. Otherwise the units may not work properly. RCA Cord 3.5 mm stereo mini cord DN-X900 CH4 Input jack CH6 Input jack CH4 Fader jack CH6 Fader jack RCA Cord 3.5 mm stereo mini cord X-control Deck1 Fader jack Deck1 Output jack DN-HC5000 USB B terminal Deck2 Fader jack Deck2 Output jack CONNECTION TO A PC • The DN-HC5000 is a plug-and-play device. This means that when the DN-HC5000 is first connected to your computer, the driver is installed automatically. • To connect the DN-HC5000 and a PC via a usable USB port, use the included USB cable. • When connected, the display below appears at the bottom right of the PC's screen. Found New Hardware USB audio device Once installation is completed, the message "Your new hardware is installed and ready to use." is displayed, as shown below. Found New Hardware Your new hardware is installed and ready to use. Installation is now complete. The DN-HC5000 is now usable. CONNECTION TO A MACINTOSH COMPUTER • The DN-HC5000 is plug-and-play device based on the Macintosh OS, and is immediately ready for use when connected. • To connect the DN-HC5000 and Macintosh computer via a usable USB port, use the included USB cable.  ENGLISH