Denon DN-X120 Owners Manual - Page 10

Getting Started Connections Playback Specifications ENGLISH Channel Fader Channel Fader Crossfader Channel Fader Start Crossfader Start 1 Turn on the CH 1/2 FADER START. 1 Turn on the CROSS FADER START A, B. 2 Move the Channel Fader of CH-1 or CH-2 control all the way to the bottom. 3 Set the standby mode on CD player. 4 When you want to start the player, move up the Channel Fader and the CD player will begin playing. 2 Slide the Crossfader all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected to PGM1.) 3 Set the standby mode on CD player. 4 Use the CROSS FADER CONTOUR controls to control the Crossfader startup curve. 5 When the Crossfader is slid in the opposite direction, CD player play will begin. NOTE • When the CROSS FADER REVERSE is set to ON, the Crossfader's operating direction is reversed. • Channel Fader Start and Crossfader Start for the same source will not operate simultaneously. You must select from either one. If both CH FADER START and CROSSFADER START A, B switches are ON, priority will be the Crossfader. CH 1/2 FADER START CROSS FADER CONTOUR CROSS FADER START A, B  1.DN-X120_ENG.indd 10 2007/12/28 18:08:18