Denon DN-X120 Owners Manual - Page 6
Part Names and Functions - crossfader
View all Denon DN-X120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Connections Playback Specifications ENGLISH Part Names and Functions For buttons not explained here, see the page indicated in parentheses ( ). Top Panel r ty u u yt r e i o w Q0 q Q1 Q6 Q2 Q3 Q3 Q5 Q4 q MIC ON/OFF/TALKOVER switch When TALKOVER is selected, all signals except the microphone level are decreased by 20 dB. When at the ON or OFF position all signals remain at their standard levels. w MIC EQ controls • Contour the frequency response of the Mic input -12 dB to +12 dB. • At the center position, sound is flat. e MIC LEVEL control Adjust the level of Mic signal. r Source EQ controls Contour the frequency response of the selected inputs. HI and MID: • A djusts the high-tone and mid-tone sound -40 dB to +10 dB. LOW: • A djusts the high-tone and mid-tone sound -40 dB to +6 dB. NOTE: Clipping may occur if adjustments are set to harsh. t Input select switch • Switches between the PHONO/LINE and LINE inputs. • When the lever of switch is vertical position, the LINE2 or LINE4 input is selected. • When the lever of switch is slope, the PHONO1/ LINE1 or PHONO2/LINE3 input is selected. • You can perform 4 direction placement (vpage 4). y CUE buttons These buttons are used to activates a channels "CUE" mode, the LED above the cue button will glow when cue mode is activated. Cue mode will send a channels incoming signal to the headphones. u GAIN Adjusts the gain of each input channel. i MASTER LEVEL control Adjust the level of the MASTER output. o MASTER BALANCE control Adjust the L/R balance of the MASTER outputs. Q0 Headphone PAN control • This function allows you to monitor the CUE level as well as the MASTER output in your headphones. A CUE Level may only be monitored of the CUE signal is selected. • Serves two purposes. In the STEREO mode it changes the relative levels of the CUE and MASTER mixed together in both ear cups. In the SPLIT CUE mode it changes the balance between the monaural CUE sound in the left and monaural MASTER sound in the right. Q1 PHONES LEVEL control Adjusts the headphone output level. Q2 SPLIT CUE button • In the STEREO mode, the stereo sound of MASTER and CUE are fed to both ear cups. In the SPLIT CUE mode, the headphone circuit provides monaural CUE sound to the left and monaural MASTER sound to the right. • When the Level Meter mode select switch is set to "MASTER". In the STEREO mode, the meter indicates the stereo level in the L/R Master output. In the SPLIT CUE mode, the monaural CUE sound level is displayed on the left and the monaural MASTER sound level is displayed on the right. • In the SPRIT CUE mode, the LED is lit. Q3 Channel Fader Controls the channel output level. Q4 Crossfader Fades the overall mixer output between channels 1 and 2. Q5 Level Meter The dual LED's indicators are used to detail either the master output level, a combination of the master output level and the CUE signal level, or the PGM1/2 monaural level. Q6 Level meter mode select switch The position of this switch will determine the Level Meter mode. In the "MASTER" position, the meter will detail the out level of the left and right channels. In the "PGM 1/2" position, the left side of the meter will indicate monaural level of the PGM 1 and the right side of the meter will indicate monaural level of the PGM 2. 1.DN-X120_ENG.indd 6 2007/12/28 18:07:04