Denon DND4500 Operating Instructions - Page 12

ENGLISH 7 SEAMLESS LOOP/HOT START AND STUTTER (1) Seamless Loop/Hot Start/Stutter (A1, A2 buttons) Setting the A point (loading the Hot Start data) Push the A1 or A2 button @0 to set the A point and Hot Start data. A 1 1 • A1 and A2 buttons can be used separately for each Hot Start. • When an A point is set, the corresponding A button light and that button is set to the Hot Start mode. Starts Hot Start When A1 or A2 button @0 is A 1 2 pushed, Hot Start playback starts from the corresponding A point. Setting the B point for Seamless Loop When the B button @1 is pushed after setting the A point or after B starting Hot start playback, the B point is set and Seamless Loop playback starts from the A point. 3 • The B button works with respect to the A point operated before the B button @1 was pushed. • If the B button @1 is pushed during seamless loop playback or after EXIT playback, the B point (or Loop)moves to the point at which the button was pushed. Management of 2 seamless loops • When the B point for A1 is detected after playback started from A1 point, playback returns to A1 point seamlessly. While A1 to 4 B looping, B point for A2 ignored. • When the B point for A2 is detected after playback started from A2 point, playback returns to A2 point seamlessly. While A2 to B looping, B point for A1 ignored. Exit/Reloop During Seamless Loop playback, EXIT/ RELOOP you can exit or return to your loop. EXIT: While the Seamless Loop playback, push the EXIT/RELOOP button @2 to exit from 5 looping. DN-D4500 continues playback after the B point. RELOOP: When the EXIT/RELOOP button @2 is pushed after exiting the loop, Seamless Loop playback resumes from the A point instantly. Stutter • A1 and A2 points can be also used for Stutter playback. To enable stutter playback, push 6 FLIP/B TRIM button !9 for A1/A2 buttons. The display will indicate STR. Push the FLIP/B TRIM button !9 to switch between the Hot Start/Seamless Loop and Stutter modes. Clear the A1/A2 point While pressing the FLIP/B TRIM button !9, push the A1 or A2 button to clear the corresponding A and B points. Or push the FLIP/B TRIM button !9 for more than 1 sec to clear both A1 and A2 points at 7 once. Quickly pressing the FLIP/B TRIM button !9 first and then A1, A2 or B buttons will clear these points individually. A 1 (2) B Trim • The Seamless Loop B points can be fine-adjusted in real-time using the Jog wheel. • Trim the points live during loop playback for rehearsal monitoring. q When the FLIP/B TRIM button !9 is pushed during seamless loop playback, the "Trim Mode" function is turned on. → 3 1 When the FLIP/B TRIM button !9 is pushed 1 or 2 times during playback or pause, the B TRIM mode is selected. Select B point w If more than 2 loops are set, A 1 the corresponding A1/A2 2 button @0 to your B point loop needs to be selected, otherwise B trim defaults to the last loop that was made. Trim B point e Turn the Jog wheel y (inner SEARCH SCAN §I side) slowly to move the B I I 67 point 1 frame at a time. 3 • Range for trimming B point is limited as follows. Between 5 frames after A point and disc end. *MP3 Between 5 frames after A point and file end. Save the B point r Push the flashing A1/A2 A 1 4 button @0 again to save new B point, and the unit will automatically exit from the B Trim mode. 12