Denon DND4500 Operating Instructions - Page 7

ENGLISH - TABLE OF CONTENTS - z Main features 7 x Connections/Installation 7 c Part names and functions 8 ~ 10 v Compact discs 10 b Basic operation 10, 11 n Pitch/Brake 11 m Seamless loop/Hot start and Stutter 12 , MP3 Playback 13, 14 . Other functions 14 ⁄0 Memo 14, 15 ⁄1 Preset 15 ⁄2 Specifications 16 2 ACCESSORIES Check that the following parts are included in addition to the main unit: q Operating instructions 1 w Connection cords for signal output (RCA) ..........2 e Remote control unit (RC-D45 1 r Remote control connection cable 1 t Service Station List 1 1 MAIN FEATURES The DN-D4500 is a double CD/MP3 player equipped with a variety of functions and high performance characteristics, specifically designed for Mobile and Club DJ's around the world. Control section 1. The DN-D4500 can be easily mounted on a standard 19-inch rack. 2. Improved visibility under low lighting conditions thanks to a large fluorescent display, back-lit illuminated action buttons and illuminated disc trays. 3. Improved interface operation thanks to a large jog/Shuttle wheel and track select knob. Functions 1. Shockproof function protecting against external vibrations 2. Auto Level Search / Instant Start 3. Pitch / Pitch Bend & Key Adjust 4. MP3 Playback It is possible to play MP3 files created in the specified format found on page 13. Files can be searched for easily either manually, or by scanning or using a number of file search functions (File search, File/Folder search, Artist name search, Title name search, File name search). 5. Seamless Loop Playback can be looped between any two points in a track without any break in the audio. Two loop start points (A-1 and A-2) can be set anywhere within the track or disc. 16. Hot Start / Stutter Playback can be started instantaneously from points A-1 and A-2. In the stutter mode, these same buttons play momentary audio while pressed and held down. 17. Brake 18. Relay Play When this mode is set, CD1 and CD2 starts playback alternately. This unit can relay the playback of CD1 and CD2 every track or every disc. 19. Power on Play The player can be set so that playback in the relay mode starts when the power is turned on. 10. Fader Start The DN-D4500 FADER START controls are compatible with our DN-X400, DN-X500, DN-X800, DN-X900 or DN-X1500 mixers. 11. Auto Disc Tray Close System 12. Preset functions - Different presets can be changed according to your needs. 13. Custom Setting Memory 14. CD TEXT / MP3 ID3 Tag name display 15. CD-R / RW Playback This player can play CD-R/RW discs, but only if they are finalized. Note: However that depending on the recording quality, the player may not be able to play some finalized CD-R/RW discs. 2 CONNECTIONS/INSTALLATION 1. Turn off the POWER switch. 2. Connect the RCA pin cords to the inputs on your mixer. 3. Connect the control cord to the REMOTE connector on the RC-D45. CAUTION: • Be sure to use the supplied control cord. Using another type of cable may result in damage. • Be sure the power is off when connecting the control cord. Otherwise the units may not work properly. • Never connect any remote controllers other than the RC-D45. Doing so can damage the equipment. The DN-D4500 will work normally when the player unit is mounted within 10 degrees off the vertical plane at the front panel. If the unit is tilted excessively, the disc may not be loaded or unloaded properly. Max. 10° DN-D4500 RCA Cord 3.5 mm stereo mini cord DN-X900 CH3 input jack CH3 Fader jack CH4 input jack RCA Cord CH4 Fader jack 3.5 mm stereo mini cord DN-D4500 CD1 Fader jack CD1 Output jack CD2 Fader jack CD2 Output jack NOTE: • Use a commercially available 3.5mm stereo mini cord for the Fader jack connections. 7