Denon DNX500 Operating Instructions - Page 12

ENGLISH 9 SPECIFICATIONS DN-X500 ■ GENERAL Dimensions: Installation: Mass: Power supply: Power consumption: Environmental conditions: 482 (W) x 112.5 (H) x 177 (D) mm (without feet) 19-inch rack mountable 4U 5.8 kg 120 V AC ±10%, 60 Hz (U.S.A. and Canada models) 230 V AC ±10%, 50 Hz (European models) 27 W Operational temperature: 5 to 35°C (41 to 95°F) Operational humidity: 25 to 85% (no condensation) Storage temperature: -20 to 60°C (4 to 140°F) ■ AUDIO SECTION Input Sensitivity & Impedance: Main Mic Aux Mic Effect (Return) 2-Phono 8-Line Output level & Impedance: Main (Balanced) Main (Unbalanced) Booth(Balanced) Rec (RCA) Effect (Send) Subwoofer Headphone Frequency Response: Line Phono Mic Signal to Noise ratio: Line Phono Main Mic Total harmonic distortion rate: Line Phono Cross talk: Channel equalizer: Hi Mid Low Microphone equalizer: Hi Mid Low -54 dBV (2.0 mV) -60 dBV (1.0 mV) -14 dBV (200 mV) -50 dBV (3.0 mV) -14 dBV (200 mV) 1 kΩ/kohms 1 kΩ/kohms 50 kΩ/kohms 50 kΩ/kohms 50 kΩ/kohms 4 dBm (1.23 V) 0 dBV (1.0V) 4 dBm (1.23 V) -10 dBV (316 mV) -14 dBV (200 mV) 2 dB (0.975 V) 0 dB (1.0 V) 600 Ω/ohms load 1 kΩ/kohms 600 Ω/ohms load 1 kΩ/kohms 1 kΩ/kohms 600 Ω/ohms 32 Ω/ohms (33 Ω/ohms load) 20 to 20 kHz ±2 dB 20 to 20 kHz RIAA ±2 dB 20 to 20 kHz ±2 dB 82 dB 75 dB 65 dB 0 dBm, 1 kHz, EQ flat 0 dBm, 1 kHz, EQ flat 0 dBm, 1 kHz, EQ flat Below 0.05% Below 0.05% Over 70 dB +10 dB, -35 dB (16 kHz) +10 dB, -35 dB (1 kHz) +6 dB, -35 dB (60 Hz) +12 dB, -12 dB (10 kHz) +12 dB, -12 dB (1 kHz) +12 dB, -12 dB (100 Hz) ✽ Specifications and design are subject to change without notice for purpose of improvement. DN-X900 ■ GENERAL Dimensions: Installation: Mass: Power supply: Power consumption: Environmental conditions: 482 (W) x 112.5 (H) x 177 (D) mm (without feet) 19-inch rack mountable 4U 5.9 kg 120 V AC ±10%, 60 Hz (U.S.A. and Canada models) 230 V AC ±10%, 50 Hz (European models) 33 W Operational temperature: 5 to 35°C (41 to 95°F) Operational humidity: 25 to 85% (no condensation) Storage temperature: -20 to 60°C (4 to 140°F) ■ AUDIO SECTION Input Sensitivity & Impedance: Main Mic -54 dBV (2.0 mV) 10 kΩ/kohms Aux Mic -60 dBV (1.0 mV) 10 kΩ/kohms Effect (Return) -14 dBV (200 mV) 50 kΩ/kohms 3-Phono -50 dBV (3.0 mV) 50 kΩ/kohms 8-Line -14 dBV (200 mV) 50 kΩ/kohms Output level & Impedance: Main (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load Main (Unbalanced) 0 dBV (1.0 V) 1 kΩ/kohms Zone (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load Booth(Balanced) 4 dBm (1.23 V) 600 Ω/ohms Rec (RCA) -10 dBV (316 mV) 1 kΩ/kohms Effect (Send) -14 dBV (200 mV) 1 kΩ/kohms Subwoofer/Lighting(Balanced) 2 dBm (0.975 V) 600 Ω/ohms Headphone 0 dBV (1.0 V) 32 Ω /ohms (33 Ω/ohms load) Frequency Response: Line 20 to 20 kHz ±2 dB Phono 20 to 20 kHz RIAA ±2 dB Mic 20 to 20 kHz ±2 dB Signal to Noise ratio: Line 82 dB 0 dBm, 1 kHz, EQ flat Phono 75 dB 0 dBm, 1 kHz, EQ flat Main Mic 65 dB 0 dBm, 1 kHz, EQ flat Total harmonic distortion rate: Line Below 0.05% Phono Below 0.05% Cross talk: Over 70 dB Channel equalizer: Hi +10 dB, -35 dB (16 kHz) Mid +10 dB, -35 dB (1 kHz) Low +6 dB, -35 dB (60 Hz) Microphone equalizer: Hi +12 dB, -12 dB (10 kHz) Mid +12 dB, -12 dB (1 kHz) Low +12 dB, -12 dB (100 Hz) Only DN-X900 Digital input: Input sensitivity Signal format -26 dB FS SPDIF (IEC60958 Type III 32 kHz ~ 48 kHz 24 bit) (COAXIAL) Digital output: Signal format IEC60958 Type II (OPTICAL, COAXIAL) Output level 0.5 Vp-p 75 Ω/ohms (COAXIAL) ✽ Specifications and design are subject to change without notice for purpose of improvement. 7 ENGLISH