Denon DVP-602CI Owners Manual - English - Page 12

Getting Started Connections Setup Playback Information Troubleshooting Specifications Connecting Equipment with HDMI connectors With HDMI connections, the video and audio signals can be transferred with a single cable. Connecting an HDMI-compatible player n Connecting a TV directly to the DVP-602CI Player TV )%.* 065 )%.* */ n C onnecting a TV to the DVP-602CI via an AV amplifier Player AV amplifier )%.* 065 )%.* */ )%.* 065 TV )%.* */ b The DVP-602CI is supported to the feature of HDMI listed below. • 30 and 36 bit Deep Color • x.v.Color z • Auto Lip Sync Correction z: "x.v.Color" is trademark of Sony Corporation Copyright protection system (HDCP) In order to play the digital video and audio signals of a DVD- Video or DVD-Audio disc using HDMI/DVI connections, both the connected DVD player and monitor must be equipped for a copyright protection system called "HDCP" (High-bandwidth Digital Content Protection). HDCP is a copy protection technology consisting of data encoding and mutual identification of the devices. The DVP-602CI is HDCP-compatible. For details on the DVD player or monitor you are using, refer to its operating instructions. NOTE • Use a CPPM-compatible DVD player to play DVD-Audio discs that are copyright-protected by CPPM. • The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted by the connected device. • Video signals are not output properly when using devices that are not HDCP-compatible. • Video signals are not output if the input video signals do not match the monitor's resolution. In this case, switch the DVD player's resolution to a resolution with which the monitor is compatible. • Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product). • If the monitor or DVD player does not support deep color, deep color signal transfer is not possible. • If the monitor or DVD player does not support x.v.Color, x.v.Color signal transfer is not possible. • If the monitor does not support "Auto Lip Sync Correction" function, this function will not work. The DVP-602CI does not support the HDMI control (CEC) function. When using the HDMI control function with a device other than the DVP-602CI, connect an HDMI control-compatible device to the MONITOR 1 terminal. The DVP-602CI can transmit the following sound formats. Compatible audio format Details Discs (examples) 2-channel linear PCM 2ch 32-192 kHz 16/20/24 bits CD, DVD-Video, DVD-Audio Multi-channel linear 8ch 32-192 kHz PCM 16/20/24 bits DVD-Audio Dolby Digital, DTS DSD Dolby Digital Plus, Dolby TrueHD, DTS-HD Bitstream 2/5.1ch 2.8224 MHz 1 bit Bitstream DVD-Video SACD HD DVD, Blu-ray Disc Use a Deep Color compatible cable for connection to Deep Color compatible devices. Audio playback is not possible with the DVP-602CI. There can be no sound output from the HDMI terminal when the "Resolution" under "Source Select" - "Video Setup" on the DVP-  602CI GUI menu is set to 480p/576p, VGA, SVGA, XGA (vpage 22).