Denon DVP-602CI Owners Manual - English - Page 13

Getting Started Connections Setup Playback Information Troubleshooting Specifications Connecting an DVI-compatible player n Connecting a TV directly to the DVP-602CI Player "6%*0 015*$"- 065 %7*% 065 TV )%.* */ n C onnecting a TV to the DVP-602CI via an AV amplifier Player "6%*0 015*$"- 065 %7*% 065 TV )%.* */ n C onnecting to a TV without passing through the AV amplifier Player "6%*0 015*$"- 065 %7*% 065 TV )%.* */ AV amplifier )%.* */ )%.* 065 AV amplifier "6%*0 015*$"- */ • Connect an HDMI connector 2 ~ 6 and OPTICAL 2 in the same way. • When using an optical cable for the digital audio connection, make the settings at GUI menu "Source Select" - "Optical" (vpage 22). • Output to the player's OPTICAL output terminal in a sound format supported by the TV. If the TV's HDMI input does not support Dolby Digital and DTS, set the OPTICAL output of the player to "PCM". When connecting with an HDMI/DVI converter cable (adapter) • HDMI video signals are theoretically compatible with the DVI format. When connecting to a monitor, etc., equipped with a DVI-D connector, connection is possible using an HDMI/DVI converter cable, but depending on the combination of components in some cases the video signals will not be output. • When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly due to poor connections with the connected cable, etc. • If the connected monitor or DVD player only has a DVI-D connector, use an HDMI/DVI converter cable. When using a DVI cable, no audio signals are transmitted. • There can be no sound output from the HDMI terminal when the "Resolution" under "Source Select" - "Video Setup" on the DVP602CI GUI menu is set to 480p/576p, VGA, SVGA, XGA (vpage 22). Output to the player's OPTICAL output terminal in a sound format supported by the AV amplifier. 10