Denon DVP-602CI Owners Manual - English - Page 21

Getting Started Connections Setup Playback Information Troubleshooting Specifications Network Setup Make network settings. F Menu tree F Setup Network Setup a Network Setup s Power Saving d Network Information • If you are using a broadband router (DHCP function), there is no need to make the settings at "Setting the IP Address" and "Setting the Proxy", since the DHCP function is set to "ON" in the DVP-602CI's default settings. • If the DVP-602CI is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 13). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. a Network Setup Wired LAN settings Use this procedure to configure the Wired LAN settings. 1 Connect the LAN cable (vpage 13). 2 Turn on the DVP-602CI (vpage 24). DVP-602CI performs automatic network setup due to the DHCP function. When connecting to a network that has no DHCP function, perform the setting in Operation 3. 3 Set the IP address at the GUI menu "Setup" - "Network Setup" - "Network Setup". q Select "Detail". e Input the address. e Use the ui p button to input the address and press the ENTER button. IP Address : Set the IP address within the ranges shown below. The Network function cannot be used if other IP addresses are set. CLASS A: 10.0.0.0 ~ 10.255.255.255 CLASS B: 172.16.0.0 ~ 172.31.255.255 CLASS C: 192.168.0.0 ~ 192.168.255.255 Subnet Mask : When connecting an xDSL modem or terminal adapter directly to the DVP-602CI, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. Default Gateway : When connected to a gateway (router), input its IP address. Primary DNS Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input the first one at "Secondary DNS". r Use the i button to select "Exit" and press the ENTER button. Setup is complete. b When connecting to the network via a Proxy server, select "Proxy" and press the ENTER button (vpage 19 "Proxy settings"). • DHCP (Dynamic Host Configuration Protocol) : These are systems by which the IP address and other network settings are automatically set for the DVP-602CI, computer, broadband router and network devices. • DNS (Domain Name System) : This is a system for converting the domain names used when browsing Internet sites (for example, "www.denon.jp") into the IP addresses actually used for communications (for example, "202.221.192.106"). w Set "OFF". r Select "Exit". q Select "Detail" and press the ENTER button. w Use the o p button to set "DHCP" to "OFF", then press the i button. The DHCP function is disabled.