Denon S1000 Operating Instructions - Page 19

ENGLISH 14 PRESET 1. Preset mode q The preset mode is available when !7 PRESET button is pushed for more than 1 sec while DN-S1000 is in Cue, pause or no disc mode. w Turn the @3 PARAMETERS knob to select the preset item. e After selecting an item, push the @3 PARAMETERS knob to select the preset data. r To change other Preset items, repeat these steps. t Push the !7 PRESET, i CUE or y PLAY / PAUSE (13) button to exit from the Preset mode. 2. Preset items and data The "*" mark next to the data indicates the default value. (1) Auto Cue : Auto Cue level search on/off. (A Cue ON* / A Cue OFF) (2) Next Track : Cross_OFF / Cross1sec / Cross2sec* / Cross3sec Select the time for fading out the currently playing track when playback of a new track is started with the next track function. (3) S-Stroke (SCRATCH STROKE) : Short*/Long Allows you to select a comfortable stroke distance for scratching "Long" is set for wide pattern strokes and "Short" is set for small pattern strokes. (4) Scratch : Delay_OFF* / Delay -1- / Delay -2- / Delay -3- Select the time after which the normal play or pause mode is set after scratch play stops. (5) Jump Time : Jump10sec* / Jump20sec / Jump30sec / Jump1min Select the skip time of Quick Jump. (6) P. Range (PITCH RANGE) : 4% Range / 10% Range* / 16% Range / 24% Range Select the playing pitch range when the power is turned on. (7) EOM Time : Track end message start time. (EOM OFF / EOM 10 sec* / EOM 15 sec / EOM 20 sec / EOM 30sec / EOM 60 sec / EOM 90 sec) (8) Total Time : Total ON / Total OFF* Total time display on / off. (9) Fader Mode (FADER START MODE) : Play / Cue* / Play / Pause Select 2-line type (Cue and Play) or 1 line type (Play and Pause). (10) Power Play (POWER ON PLAY) : P. Play ON / P. Play OFF* Playback starts when the power is turned on if a disc is loaded. (11) Pitch : Pitch ON* / Key AdjON (KEY ADJUST ON) / Pitch OFF Select the pitch mode when the power is turned on. (12) Play Mode (SINGLE / CONTINUOUS / SINGLE PLAY LOCK) : Single / Cont. / Play Lock* Select the play mode when the power is turned on. (13) Time Mode (ELAPSED / REMAIN) : Elapsed* / Remain Select the time mode when the power is turned on. (14) Memo Clear (MEMO ALL CLEAR) : Clear all MEMO data in the non-volatile memory. q To clear all MEMO data, push the PARAMETERS knob. • "Clear OK?" flashes on the character display. w Push the PARAMETERS knob again and select "OK" to execute clearing all MEMO data. • "Memo Clear" is displayed on the character display while clearing. e Once clearing is completed, "Complete!" is displayed. (15) Version No. : The DN-S1000's software version is displayed. (SYSTEM / DSP) (16) Preset Int.(PRESET INITIALIZE) : Set all the preset data back to the factory defaults. q To clear the PRESET data, push the PARAMETERS knob. "Initial OK?" flashes on the character display. w Push the PARAMETERS knob again and select "OK" to start clear the preset data. "Preset Int" is displayed on the character display while data clearing. e Once clearing is completed, "Complete!" is displayed. 19