Dewalt DCF680N1 Instruction Manual - Page 12
Torque Adjustment Collar Fig. 3, Quick Release Chuck Fig. 1, OPERATION, Installing and Removing - manual
View all Dewalt DCF680N1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Torque Adjustment Collar (Fig. 3) The torque adjustment collar (I) is marked with numbers and a 'MAX' symbol. The higher the number on the collar, the higher the torque. To lock the clutch for fastening operations, move to the 'MAX' position. Failure to do this will allow the clutch to slip while attempting to fasten. Quick Release Chuck (Fig. 1) NOTE: The chuck accepts 1/4" (6.4 mm) hex accessories only. To install a bit, insert the bit into the chuck until the clip locks it in place. To remove a bit, pull the chuck (H) forward. Remove the bit and release the chuck. OPERATION WARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Installing and Removing the Battery Pack (Fig. 4) NOTE: For best results, make sure your FIG. 4 battery pack is fully charged. To install the battery pack (G) into the tool handle, align the battery pack with the recess in the tool's handle and slide it into the handle until the battery pack is firmly seated in the tool and ensure that it does not disengage. G To remove the battery pack from the tool, press the release button (F) and firmly pull the battery pack out of the tool handle. F Insert it into the charger as described in the charger section of this manual. BATTERY FUEL GAUGE (FIG. 5) The DEWALT cordless screwdriver FIG. 5 has a fuel gauge which consists of A three green LED lights that indicate the level of charge remaining in the battery pack. To actuate the fuel gauge, press and hold the motion control activation trigger (A). A combination of the three green LED lights will illuminate designating the level of charge left. When the level of charge in the battery is below the usable limit, the fuel gauge will not illuminate and the battery will need to be recharged. NOTE: The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate tool functionality and is subject to variation based on product components, temperature and end-user application. For more information regarding the battery fuel gauge, please call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt. com. To Operate Your screwdriver uses gyroscopic technology to sense your hand motion. To operate, press in the motion control activation trigger and turn your hand in the direction that you want the screwdriver to operate. SETTING INITIAL STARTING POINT 1. Grasp the screwdriver as shown in Figure 6. 2. Press and hold in the motion control activation trigger. 3. When the LED illuminates the tool is ready for use. 10