Dewalt DCS355D1 Instruction Manual - Page 12
ASSEMBLY AND ADJUSTMENTS, Installing/Removing Accessories, Fig. 3-5
![]() |
View all Dewalt DCS355D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English INTENDED USE This oscillating multi-tool is designed for professional detail sanding, plunge cutting, flush cutting, removal of excess materials and surface preparation applications. DO NOT use under wet conditions or in presence of flammable liquids or gases. This oscillating multi-tool is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn tool off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. WARNING: Risk of lacerations or burns. Do not touch the sharp edges of accessories at any time. Do not touch workpiece or blade immediately after operating the tool. They can become very hot. Handle carefully. Always allow accessories and workpiece to cool before handling. Installing/Removing Accessories (Fig. 3-5) TOOL-FREE ACCESSORY CLAMP The DCS355 features a quick change accessory system. This allows for faster accessory changes without the need for wrenches or hex keys like other oscillating tool systems. 1. Grasp the tool and squeeze the FIG. 3 accessory clamping lever (C) as shown in Figure 3. 2. Clean any residual debris from the tool shaft and the accessory holder. 3. Slide the accessory between the shaft (J) and the accessory holder J C making sure the accessory engages all eight pins on the holder and is flush with the shaft. 4. Release the accessory clamp lever. NOTE: Some accessories, such as scrapers and blades, can be mounted at an angle if required as shown in Figure 5. FIG. 4 FIG. 5 INSTALLING/REMOVING SANDING SHEETS (FIG. 6) A diamond shaped platen uses a hook and loop adhesion system to attach the sanding sheets. The platen allows you to use it on large flat surfaces and tight spots or corners. 1. Attach the sanding platen (K) as described under Installing/ Removing Accessories. 10
![](/manual_guide/products/dewalt-dcs355d1-instruction-manual-1c80301/12.png)