Dewalt DW030PL Instruction Manual - Page 6
Error Codes - battery
![]() |
View all Dewalt DW030PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
E Error Codes If INFO appears on the display window with a Code number, perform the corresponding Corrective Action. Code Description Corrective Action 101 Received Signal Too Weak, Measuring Time Too Long Use the target plate or change the target surface. 102 Received Signal Too High 201 Too Much Background Light Target is too reflective. Use the target plate or change the target surface. Reduce the background light on the target area. 202 Laser Beam Interrupted Remove the obstacle and repeat the measurement. 203 Insufficient Power Recharge the tool's battery. 301 Temperature Too High Allow the device to cool down to a temperature within the specified Operating Temperature Range. 302 Temperature Too Low Allow the device to warm up to a temperature within the specified Operating Temperature Range. 401 Hardware Error Switch the device on/off several times. If the error still occurs, return the defective device to the Service Center or distributor. Refer to the Warranty. 402 Unknown Error Contact the Service Center or distributor. Refer to the Warranty. 6
![](/manual_guide/products/dewalt-dw030pl-instruction-manual-dbe76f3/6.png)